Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pedals

iSSi Flash II
$85.00 - $90.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included
iSSi Flash III
$105.00 - $120.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
iSSi Keo Compatible Cleat
$25.00
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install
iSSi Road Carbon Pedals
$100.00
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single-Sided Clipless - Spindle Material: Chromoly steel - Weight: 266 grams
Wheels Manufacturing Inc. Pedal Washers
$10.00
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Speedplay SYZR Chrome-Moly
$165.00
Syzr Pedal Systems transfer power more efficiently to your off-road rig. Rider power is delivered to Syzr pedals directly through the cleats, not through the spongy rubber lugs of the shoe sole. Direct, Through-the-Cleat Power Transfer ensures that no rider energy is lost during transmission. SYZR pedals also use Active Cleat Stabilization Technology to improve the precision of the pedal/cleat connection and eliminate the slop and lateral instability common to off-road pedals. With advanced Roller-Cam Release Technology, Speedplay ensures consistent release in wet or muddy conditions. Instead of the usual metal-to-metal connection that allows other pedals and cleats to seize during release, Syzr cleats feature Ceramic Roller-Cams that do not seize when wet because they roll. In addition to improving consistency of release, the ceramic contacts provide exceptional, long-term durability.
Speedplay Torque Wrench
$19.99
The Speedplay Cleat Fastening Screw Torque Wrench provides the proper torque of 2.5Nm / 22 in-lbs. required when installing the 4mm Cleat Fastening Screws (8) used with all Speedplay road cleats. Includes a removable #2 Philips bit.
Speedplay Ultra Light Action Walkable Cleats
$55.00
Speedplay’s new Walkable Cleat technology for Ultra Light Action pedals sets a new standard for user-friendly, off-the-bike functionality. Speedplay’s Ultra Light Action Walkable Cleats are the first truly walkable cleats for road pedals. The integrated, rubberized covers stay on the cleats while you are riding. When walking, the covers improve traction and protect the cleats from wear. Additionally, the thin, contoured cleat profile allows for a more natural gait and makes walking in road shoes much less awkward. Included with the cleat sets are handy plugs called Cleat Buddies for use when walking in dirty conditions. Cleat Buddies prevent debris contamination by fitting into the cleat’s center cavity. When you are ready to ride, Cleat Buddies can be easily removed for riding and conveniently snap together to fit in a pocket or bag. - Grippy, rubberized tread covers the cleat for improved traction - Durable cover material is resistant to wear and will not scuff floors - Thin, contoured cleat profile makes walking easier and more fluid - Fits all standard 3-Hole and 4-Hole shoes - Replacement Ultra Light Action Walkable Cleat Covers and Cleat Buddies are available separately
Shimano Deore XT M8100 Pedals
$120.00
- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)
Shimano SM-SH51 SPD Cleat Set
$18.99
Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
Shimano SPD-SL Cleat Set
$29.00 - $29.99
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
Shimano Ultegra R8000 Pedals
$199.99
Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams
LOOK Geo Trekking
$80.00
Simple, yet highly efficient. The GEO TREKKING PEDAL is LOOK's two-sided commuter option, allowing you to choose between a ride to work or a quick training session. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Composite - Traction: Composite studs - Spindle: Chromoly+ - Platform width: 84mm - Weight (pedal): 203g - Weight (pair + cleats): 461g
LOOK Keo 2 Max Carbon
$125.00
Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Carbon - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 60mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 125g - Weight (pair + cleats): 312g
LOOK Keo Grip Cleats
$25.00
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g
Time XPRESSO 7
$125.00
The Xpresso 7 features carbon blade tension adjustment, a low stack height, and an oversized pedal platform for pedaling efficiency and comfort. This is the perfect pedal for criteriums, gran fondos, and everything in between. It is the only pedal in the Xpresso line to use a carbon body, and it also features a hollow steel axle that's both light and durable. The ICLIC system is pre-opened which makes clipping in super easy.
Time Xpro 10
$175.00
The XPro 10 is perfect for high performance riders. With a carbon body and hollow steel axle the XPro 10 is light and durable at the same time. The ICLIC system is pre-opened making clipping in super easy. The XPro 10 features carbon blade tension adjustment, a low stack height and an oversized pedal platform for pedaling efficiency and comfort.
LOOK X-Track Easy Cleats
$15.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Multidirectional - Clip in: 30% easier - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g
Garmin Vector 3 Dual-Sensing Power Meter
$999.99
Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Garmin Vector 3S Single-Sensing Power Meter
$599.99
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Garmin Vector 3S Upgrade Pedal
$499.99
Upgrade your Vector 3S to a dual-sensing power meter, and step beyond watts to see exactly how your pedaling style generates the force that moves you. When paired with Vector 3S, the upgrade pedal completes the Vector power meter system, providing left/right balance data and cycling dynamics. With the new podless design, it installs like any other bike pedal. Revolutionary cycling dynamics show you exactly where you’re generating power throughout the pedal stroke. See where you apply force on the pedal to ensure proper cleat position. The upgrade pedal also tracks when and how long you were seated versus standing so you can gauge position effectiveness.
Crank Brothers Candy 11 Pedals
$450.00
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
Crank Brothers Candy 3
$135.00
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
Crank Brothers Easy Release Cleat Kit
$26.99
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Crank Brothers Highline Sticker Kit
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Crank Brothers Mallet E Pedals
$169.00
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
Crank Brothers Mallet Enduro 11
$350.00
The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system
Crank Brothers Pedal Refresh Kit
$24.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
Crank Brothers Pedal Refresh Kit - Eggbeater 11/Candy 11
$24.99
A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool
Crank Brothers Premium MTB Cleats
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
Page 1 of 2 Next page