The absoluteBLACK Oval Bash Guide is designed specifically for oval chainrings, keeping your chain secure at every single crank position. This bash guard system provides exceptional durability with maximum weight savings thanks to intelligent design and titanium hardware. - Fully compatible with oval chainrings - The adjustable 48-53mm chainline makes it compatible with most bike setups - Includes titanium hardware and spacers - Suitable for XC, trial, enduro, and aggressive enduro - 26-34t capacity for oval chainrings or 28-36t capacity for round chainrings - Mounts to ISCG-05 mount - Weight: 69g
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
The Descendant 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 6000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately BB Included: No Chainring BCD: SRAM Direct Mount Crank Intended Use: Mountain Number of Chainrings: Single Drivetrain Speeds: 12, 11, 10 Spindle Interface Type: SRAM DUB Chainline/Hub Compatibility: 135/142 MTB Hubs
- Crank Construction : HOLLOWTECH II - Optimum power transfer
$167.00 - $175.00
The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD
$145.00 - $150.00
- Aluminum crank arm and spider with steel spindle - 4 bolt spider compatible with all XT 8000 series chainring configurations - Hollowtech II crank arm construction - Steel driving gear teeth and aluminum support gears - 96mm P.C.D. - 176 Q-Factor, 53.4mm OR 50mm chainline - BB Included: No - Chainrings Included: No
The Shimano SLX FC-M7100 crankset for MTB offers the simplicity of a 1x drivetrain with the stability and compatibility of Hollowtech II technology. - Chainring sold separately - Hollow forged crank maximizes power transfer while limiting weight - Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight and rotating performance - Features 52mm chainline - 172mm Q-factor - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs - Crank Length: 165mm - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: Shimano Hollowtech II - Drivetrain Speeds: 12 - Chainring BCD: Direct Mount
SRAM Force crank spiders are for repairing your crank or converting it to different gearing. Available in 110mm and 130mm BCDs.
The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 49.0mm chainline
Origin-8's Trackstar Crankset is made of light and durable forged aluminum and features a stylish machined-aluminum 46-tooth 1/8-inch chainring for excellent power transfer on the road and track. - Single speed crankset - Forged AL6061-T6 alloy crankarms - CNC alloy 1/8" 46 tooth chainring - 42mm chainline with 103mm JIS BB
- M30 cap with self-extracting crank bolt and washer - Compatible with 2013 and newer FSA Gossamer cranks
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
Page 1 of 1