Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 44-inch - Fits Thule AeroBlade - Fits Thule SquareBar
Carry 2 bikes in the bed of your pick-up truck with no bolting or drilling with this integrated locking fork mount carrier Features -Aluminum telescoping bar with SoftGrip™ rubber feet hold carrier on side rails of full size and small pick-up trucks without drilling (compatible with most bedliners) -3 One-Key lock cylinders included to lock the bikes to the carrier and the carrier to the truck. -Fits full size and small pick-up beds (compatible with most bed liners) -Carries 2 bikes. More bikes can be fit with the Bed-Rider Add On Block (#BRLB, sold separately)
Easy-to-install foot for Thule Evo roof racks, for vehicles with raised railings. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings and ensures a perfect fit - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car
Thule's versatile Low Rider is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. Made of heavy-duty metal for strength and reliability, the Low Rider boasts a pass-through hole for locking your rig with a cable lock, too.
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 8 locks, all using the same key
Heavy-duty aluminum load bars with a unique tri-slot design for fitting of multiple accessories. - Flexible tri-slot design allows use of a range of load accessories independently or in combination - Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 175cm = 69-inch - 200cm = 79-inch
Sleek, aerodynamic ski rack for all types of skis and snowboards. - Holds skis and snowboards securely with ultra-soft rubber arms that grip without scratching the surfaces - Safely carries thicker modern skis and snowboards and reduces the carrier height when unloaded with an integrated vertical spring system - Easy to open and close while wearing gloves, thanks to an oversized push button - Added roof clearance for skis with tall bindings, thanks to included extension feet that raise the carrier - Fits Thule rack systems, round bars, and most factory racks with both T-Track and SpeedLink around-the-bar mounting options - Holds up to 4 pairs of skis or 2 snowboards Technical specifications - Dimensions: 24.4 x 2.8 x 3.9 inch - Loading width: 19.6-inch
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 135cm / 53 in
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon. • Sold as a set of two • Replacement parts for broken or lost end caps
Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 118cm / 47 in
Some of the best ideas are home grown in Colorado, and The Fattie is one of them. Easily convert your BrassKnuckles rack to fit your fat bike–the kit includes a larger wheel chock and 2 ratchet strap extenders.
Secure your through-axle-equipped bike to your fork mount bike rack (sold separately) with RockyMounts' DriveShaft. This adapter allows you to quickly and easily mount a bike with a 15mm or 20mm through-axle fork to your quick-release fork mount rack. It also comes with a lock for peace of mind.
The Swiss Army of truck racks is now even better. Redesigned to save previous real estate in truck beds, the DriveShaft Track is better than ever before. 12mm, 15mm, 20mm thru-axle bike rack carrier for truck bed channels found in Toyota, Chevy, GMC, and Nissan. RockyMounts DriveShaft is the first on the market with the ability to carry 12/15/20mm thru-axles and to securely lock your bike. The mouth opens wide for easy loading and the cam lever adjusts like a quick release for a strong hold. Snap-in nylon shims prevent the axle from being unscrewed and allows you to switch between 12mm, 15mm, and 20mm loads.
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
The RockyMounts LoBall Locking is a bolt-on bike rack for trucks, trailers, vans, SUV's, and home storage. It includes a locking 9mm quick release, lock core, and two keys.
Replacement snap-in nylon shims for the RockyMounts DriveShaft product line. Shims enable DriveShafts to carry a thru-axle equipped bike. Shims can be used on RockyMounts DriveShaft, DriveShaft HM, and DriveShaft SD.
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Page 1 of 1