Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.
The Zipp Tangente butyl tubes are designed to meet the needs of a new era of road riding that includes adventures aboard wider tires. The tube’s 0.60mm thickness is optimized for durability. - 37mm valve stem length - Lightweight aluminum valve body with removable Presta valve core - For use with Zipp Tangente Aluminum Knurled Valve Extender - 0.60mm thick to optimize durability - Weight: 72 grams in 700x20-28 and 96 grams in 700x28-32
Every watt, every bit of energy counts whether you're racing or training; make sure you're getting the biggest aero advantage with Zipp's Tangente Course Tire. It takes advantage of Firecrest technology to reduce rolling resistance and increase airflow over the leading edge of the tire, meaning you work less to go faster. The rubber used in the Tangente tire is formulated for grip and acceleration, particularly in dry conditions, and the 120 TPI casing features a nylon puncture protection strip so you get as many miles as possible out of this rugged tire. It's light too, complementing your already feathery race day rig.
A clincher with the insurance of a puncture protection belt, the Tangente Course features a 120tpi casing, supple ride, and low rolling resistance.
Conventional wisdom on bicycle tires has held that smaller is better. Smaller tires were supposed to be lighter, more aerodynamic and have lower rolling resistance. Then came science. Research has shown that a larger tire has the ability to cut rolling resistance, making you faster than you would be with a traditional 23c-wide racing tire. And of course, a larger tire offers improved grip in dry and wet conditions. In some cases, when using the right rim, a bigger tire also can improve aerodynamics. Let’s not forget that comfort gets a big upgrade as well. The Zipp Tangente Course R30 tire give riders a high performance clincher at widths suitable for less than perfect conditions—rough roads, wet roads. The looming disc brake revolution will mean that you can run tires significantly larger than the 25mm limit on many bikes. The Tangente Course R30 tires take disc brakes’ opportunity for increased tire width and multiplies that with faster rolling, better grip and improved aerodynamics. - High-performance sport and training clincher tire - 30mm width - 120tpi nylon casing - Nylon puncture protection layer under tread - 260 grams (R28), 306 grams (R30) - 33.15 watts of rolling resistance @ 40kph (with Zipp butyl tube) - 70 ShA durometer rubber (Shore A) - New water-siping tread pattern - Comfortable in rough conditions
When you roll up to the starting line, you know you've got an aero advantage if your wheels are wrapped in Zipp's Tangente SL Speed Tubular Tire. The 320 TPI cotton casing is tough enough to tackle the ugliest stretches of blacktop, while the puncture-resistant belt keeps you inflated and rolling through the finish line. Zipp focused on improving leading edge airflow to get you that aero advantage, and the low rolling resistance saves power so you go faster longer. They even formulated rubber specifically tailored for grip and acceleration you'll notice as you're sprinting for the line. Your tires link you to the pavement; make that link as efficient as possible with the Tangente.
$74.00 - $79.99
Designed for race day, the Tangente Speed is optimized for aerodynamics, rolling resistance and road feel with clincher convenience. - Rubber formulated for grip and acceleration - 220 TPI nylon casing - New aero tread pattern - Intended use: racing - Very low rolling resistance to save power - Optimized for dry road conditions - Sidewalls designed for supple and compliant ride feel
Zipp's Tangente Speed tires are a part of an aero wheel system that keeps you going fast, sticking in corners, and accelerating through the sprints. More than just a strip of rubber, the Tangente Speeds are optimized for smooth airflow with an aero tread pattern and materials formulated for grip and acceleration. Low rolling resistance means you save power over the course of a long race, and the 220 TPI casing is tough enough to roll over the roughest roads.
Tangente Speed: Designed for race day, the feather-weight Tangente Speed clincher features a 220tpi casing with thin sidewalls for excellent road feel, segment-leading low rolling resistance and biting grip in the turns.
Some of the greatest roads in cycling aren’t particularly well paved. Sometimes, the fact that they aren’t manicured like a golf green is part of the charm. Or maybe all of it. Today’s bikes, handlebars and other components are stiffer than ever, but the emergence of disc brake technology has created an opportunity for riders to run a high-performance 28mm clincher. The Speed R28 is chance to double down on traction, trim rolling resistance, improve your comfort on long days and even better your bike’s aerodynamics. Zipp has introduced the Speed R28 to give riders a race-ready tire for those days when you want all the performance of a top-of-the-line racing clincher at a pavé-swallowing width. Wet or dry, it combines the grip of a bigger contact patch plus the reduced rolling resistance that comes with a larger casing. - High-performance race tire - 28mm width - 220 tpi nylon casing - 216 grams - 21.97 watts of rolling resistance at 40kph (with Zipp butyl tube) - 60 ShA durometer rubber (Shore A) - New water-siping tread pattern - Supple over rough roads
$9.00 - $14.00
Zipp's Tangente Valve Extender is for use with Zipp butyl inner tubes and Zipp Tangente tubular tires with removable valve cores; and other leading tubular tires and inner tubes that have removable cores. It lengthens the valve so that it protrudes far enough from deep-section aero rims/wheels so that you can attach your pump to inflate your tire. This extender is made of lightweight aluminum, has a threaded tip for you to screw in your valve core so you can still seal the valve, and it is made with the same attention to detail that's built into Zipp's wheels and other products.
- Kit includes tape, 2 valves & 1 valve core wrench
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
$8.99 - $34.00
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
Convenient, state-of-the-art clincher repair kit with a stealth ‘carbon-look’ finish fits securely in cages for a reliable storage case. Rattle-proof padding for a noiseless ride. - Includes: XLAB Tri Tool Kit, 2 tire levers, (2) CO2s, Speed Chuck inflator and patch kit. Capacity: 25.8 in3 (423 cm3) - Height: 5.25 in (133.5 mm) - Weight: 447g (Gear Box Kit w/ full repair kit + spare tube), 65g (Gear Box empty)
$9.79 - $14.99
Clean Streak, Shop Size, 23oz Aerosol - Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
Another must-have tool for the busy bike shop. Wheels Mfg. machined aluminum Speed Spacers take up extra space on your bearing press so you don't need to spin the handles as far to tighten things up. They also work in axle configurations where you need to press in a bearing over an axle. - Machined Aluminum - Anodized Red - Sold individually Compatible with: - PRESS-4 - Economy Press - PRESS-1 - Large Sealed Bearing Press - PRESS-1-HNASSY - Handle & Rod Assembly
- Anodized aluminum construction. Includes mounting hardware - Measures threads for all cones, locknuts and axles - Metric measurement on one side and Standard on the other side
- Bearing extractors set for pushing out 22mm, 24mm, and 30mm ID sealed bearings from bottom bracket cups. - Compatible with Wheels Mfg. 1/2" threaded rod press and handles (PRESS-7 and PRESS-7-PRO). BB-EXT Includes (1) 30mm ID sealed bearing extractor (1) 24mm ID sealed bearing extractor (1) 22mm ID sealed bearing extractor (1) 52mm receiver cup (1) 44mm receiver cup sleeve (1) 42mm receiver cup sleeve (1) 39mm receiver cup sleeve (1) bearing pusher shaft
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots. Includes retaining tool, top cap, and three sizes of bushing drifts. - Fits eyelet sizes - 10mm, 12mm, and 1/2" - Machined aluminum - Anodized Red
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups
The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers - (3) DS-2 narrow dropout savers
An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Wheels Manufacturing Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm. - Package includes 2 handles and a 3/8"-12 threaded rod - Economy Bearing Press, used with separately-purchased bearing adaptors
- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)
Wheels Mfg Headset Cup Press is a robust, and easy to use tool made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. One drift is machined with multiple steps to fit common head tube inner diameters. The other drift is two-sided to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings. - Machined aluminum handles and drifts - Red anodized drifts and handles - Zinc-plated 1/2" diameter threaded rod - Long threaded rod works with long head tubes up to 250mm - Includes one Head Tube Drift - Includes one Headset Cup Drift - Laser etched for easy identification - Made in the USA
Headset drift for sealed bearing installation press. - Drift is machined with multiple steps to fit common head tube inner diameters - Compatible with bearing presses using 1/2" diameter rod, such as the Wheels Mfg. Headset Cup Press (PRESS-8) - Fits the following headtube inner diameters: 34mm, 44mm, 49mm, and 56mm
This 23-piece Wheels Mfg. drift set is used to install 10mm and larger inside diameter sealed bearings, using a press with 3/8" diameter rod - Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000, and 6001 bearings - 10mm ID hole, for use with Wheels Manufacturing PRESS-1 or PRESS-4 bearing press handles
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
Page 1 of 28 Next page