Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Bottles/Cages

Profile Design Aeria Hydration
$119.99
HSF / AERIA hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem (Stem is required for installation) - combined with the Aeria Ultimate aerobar, this system provides a fully integrated front end “super bike” solution for any bike. This BTA system features the race proven “no splash” fill port, a straw magnet mount for streamlined aero over the top of the system, a bite valve for fluid control and a removable computer mount. - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 30oz (857ml) - Only Compatible With: Profile Design Aeria Ultimate Stem (70mm or 100mm - ONLY) - Weight: 420g
Profile Design Aerodrink Base Bar Bracket
$21.00
Profile Design's Aerodrink Base Bar Bracket is the perfect holder for your Profile Aerodrink bottle. It weighs next to nothing and is built tough to firmly hold bottles and last for years of training and racing. It attaches quickly and easily to all Profile, and most other base handlebars (base bars and bottles sold separately).
Profile Design Aerodrink Parts Kit
$12.99
Somewhere between the excitement of competition and recovery, it can be easy to misplace things. With Profile's Aerodrink Parts Kit you can replace both straws, the mesh sponge and the two rubber bands that keep your Aerodrink ready for your next event.
Profile Design Aqua Rack ii
$53.00
This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension
Profile Design FC25 Drink System
$106.00 - $113.00
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
Profile Design FC35 Drink System
$117.00 - $125.00
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 35oz (1035ml) - Width: 65mm-140mm (center to center) - Weight: 35oz (470g)
Profile Design RM-10 System
$95.00
The RM-10 is designed specifically for bikes featuring the Ritchey 10mm Saddle Clamp standard. It enables the rider to replace the cylinder nuts that secure the clamp to the seatpost with a bracket that holds a hydration system. The Arch clamp allows for 14° of adjustment allowing the cage to slide under saddles with a transition tab. To add to the versatility this system can run 1 or 2 cages to customize for training or racing. - Replaces the cylinder nuts on the 10mm seatpost saddle clamp standard. - Multiple bolt placement along bracket for multi-saddle compatibilty - Patent pending arch clamp provides 14 degrees of adjustment - Armrest Material: 6061-T6 AL - Post Material: Steel - Adjustment: 14 degrees of tilt adjustment - Cage Material: Injected Nylon/Glass Fiber (Vise Cage) - Capacity: 1 or 2 cage compatible - Cage: Vise - Weight: 130G - Includes 1 lightweight Profile Design Cage Compatible Bikes - Cervelo P-Series - SCOTT Plasma - GURU - Stevens - Louis Garneau - Diamondback - Kestrel 4000 - Fuji D6/Norcom - BH Aero - Neil Pryde
Profile Design Aerodrink System
$26.00
With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).
Profile Design Kage
$7.99
Profile's Kage ensures you'll never lose your bottle again. The clever design provides a great grip and doesn’t leave ugly marks on bottles. And, the injection-molded nylon/fiberglass construction is incredibly strong and light, too!
Profile Design Stryke Kage
$8.00
Profile's Stryke Kage ensures you’ll never lose your bottle again. Constructed of injection-molded nylon/fiberglass, this incredibly strong cage provides a great grip and doesn’t leave marks on bottles. Plus, this cage is super light, too.
Profile Design Vise Kage
$12.99
The Vise Kage is a rear mounted firm-hold bottle retaining system to smooth airflow in the aero position. Recommended for Profile Design rear-mount systems. - Nylon Glass Fiber non-marking construction - Weight: 27g
Page 1 of 1